Make a plant pot trellis

This project can be made for inside or outside use, and would be ideal for a herb garden.

• 36mm x 12mm timber slats or reclaimed timber as required

• 28 x 20mm screws

• Wall or fence fixings

• Paint

• Measure tape and pencil

• Mitre saw or hand saw

• Square

• Drill with bit and square bit

• Paintbrush

When using power tools, always wear goggles and ear defenders, and ensure all jewellery is tucked away, hair tied back and don't wear loose clothing that may get tangled.

• 4 slats 1440mm in length

• 6 slats 840mm in length

These sizes can be adjusted to suit your space requirements.

$75 for timber slats, fixings, and plant pots. This excludes Resene products. I used Resene Woodman Penetrating Oil Stain in Pitch Black.

Step 1: Measure

Step 2: Cut

Step 3: Stain

Step 4: Lay out the timber

Step 5: Pre-drill screw holes

Step 6: Install

Step 7: Attach your plant pots

Step 8: Your plant pots are now ready to be planted with your choice of plants.